Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 548 / 1224

9 - 24
9.4 PLC side setting when connecting to MELSECNET/H
(2) MELSECNET/H Utility's [Parameter Settings]
(a) Parameter settings
: Necessary : As necessary : Not necessary
*1 Specify the same network No. as that of the GOT.
*2 Set the same mode setting as that of the GOT.
*3 Be sure to set the setting to perform the cyclic transmission.
Item Set value
Setting necessity at GOT
connection
Number of modules 1
Link device refresh cycle (Use default value)
Routing parameter Refer to (b).
Target module 1
Start I/O No. 0000H
Channel No. (Use default value)
Operation
settings
Network type MNET/H mode (Control station)
Network No.
*1
1
Group No. 0
Mode
*2
Online
Return (Use default value)
Refresh parameters (Use default value)
Network
range
assignment
Total stations 2
Assignment method Start/End
LB/LW
settings
*3
Send range
for
each
station LB
Sta. No.1
Start 0000H
End 00FFH
Sta. No.2
Start 0100H
End 01FFH
Send range
for
each
station LW
Sta. No.1
Start 0000H
End 00FFH
Sta. No.2
Start 0100H
End 01FFH
(LX/LY) settings
*3
No setting
Monitoring time (Use default value)
Specify I/O master Sta.
*3
No setting
Specify reserved Sta. No setting
Supplementary settings (Use default value)