Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 152 / 1224

2 - 68
2.9 MELSEC-WS
(3) Engineering software for MELSEC-WS and device representation of GT Designer3
The engineering software for MELSEC-WS and the device representation of GT Designer3
are different. Set the device by referring to the following table.
*1 When the mapping position is changed by the MELSEC-WS engineering software, a mismatch occurs
between virtual devices on GOT and MELSEC-WS mapping devices.
When mapping is changed, use D devices or LD devices.
Device GT Designer3 Engineering software for MELSEC-WS
I
*1
I .
(1-12(Dec)): Module number
(1-8): Input position
[ ].I
: I/O model name (such as XTIO)
(1-12(Dec)): Module number
(1-8): Input position
Q
*1
Q .
(1-12(Dec)): Module number
(1-8): Output position
[ ].Q
: I/O model name (such as XTIO)
(1-12(Dec)): Module number
(1-8): Output position
LQ
*1
LQ .
(0-3): Byte number
(0-7): Bit position
.
: "Result"
(0-3): Byte number
(0-7): Bit position
LI
*1
LI .
(0-3): Byte number
(0-7): Bit position
[0] . .
: CPU type (CPU0, CPU1)
(0-3): Byte number
(0-7): Bit position
EI
*1
EI
(1-2): EFI number
(1-3): Device number
(0-3): Byte number
[0].EFI : , Byte
: CPU type (CPU0, CPU1)
(1-2): EFI number
(1-3): Device number
(0-3): Byte number
EQ
*1
EQ
(1-2): EFI number
(0-2): Byte number
[0].EFI :1, Byte
: CPU type (CPU0, CPU1)
(1-2): EFI number
(0-2): Byte number
D
D
(0-99(Dec)): Byte number
RS232 data
(Safety controller to RS232)
W
W
(0-49(Dec)): Word number
Word virtualization of D device
W0= (D1(Upper bits), D0(Lower bits))
GOT independent device
(Not available)
LD
LD
(0-3): Byte number
RS232 data
(Safety controller to RS232)
LW
LW
(0-1): Word number
Word virtualization of LD device
LW0= (LD1(Upper bits), LD0(Lower bits))
GOT independent device
(Not available)