Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 142 / 1224

2 - 58
2.5 MELSEC-QnA, MELDAS C6 *
2.5 MELSEC-QnA, MELDAS C6 *
The device ranges that can be set when selecting [MELSEC-QnA/, MELDAS C6*] as the controller type are as follows.
*1 Do not set a file register by GT Designer3 when executing multiple programs with the file of the file register set at [Use the same
file name as the program] by the PLC parameter of GX Developer.(Except MELSEC-QnA)
Otherwise, read/write at GOT will be erroneous.
*2 Available for file register of block No. switched with the RSET instruction.
*3 Available for file register of block No. of file name switched with the QDRSET instruction.
*4 This is not supported by GT21.
*5 The device No. must be set in multiples of 16.
*6 When monitoring MELDAS C6/64, if a word device outside the range is set, the value becomes indefinite.
When a bit device outside the range is set, the object may not be displayed or the set function may fail to operate.
Check the set device using the device list of GT Designer3.
*7 Devices used by the MELDAS C6/64 system cannot be used.
*8 Do not use local devices set in the MELSEC-Q system.
Otherwise, normal monitoring is not performed.
*9 This cannot be monitored when in GOT multi-drop connection.
*10 Only reading is possible from QS001CPU.
Device name
*6*7*10
Setting range
Device No.
representation
Bit device
Input (X) X0 to X3FFF
Hexadecimal
Output (Y) Y0 to Y3FFF
Internal relay (M)
*8 M0 to M32767
Decimal
Latch relay (L) L0 to L32767
Annunciator (F) F0 to F32767
Link relay (B) B0 to B7FFF Hexadecimal
Timer
*8
Contact (TT) TT0 to TT32767
Decimal
Coil (TC) TC0 to TC32767
Counter
*8
Contact (CT) CT0 to CT32767
Coil (CC) CC0 to CC32767
Special relay (SM) SM0 to SM2047
Retentive timer
*8
Contact (SS) SS0 to SS32767
Coil (SC) SC0 to SC32767
Step relay (S) S0 to S32767
Link special relay (SB) SB0 to SB7FFF Hexadecimal
The bit specification of the word device
(except Timer, Counter, Retentive timer, Index register)
Setting range of each word device ―
Word device
Data register (D)
*8
D0 to D32767
Decimal
Special data register (SD) SD0 to SD2047
Link register (W) W0 to W7FFF Hexadecimal
Timer (current value) (TN)
*8
TN0 to TN32767
Decimal
Counter (current value) (CN)
*8
CN0 to CN32767
Retentive timer
(current value) (SN)
*8
SN0 to SN32767
Link special register (SW) SW0 to SW7FFF Hexadecimal
File register (R)
*1*2
R0 to R32767
Decimal
Extension file register (ER)
*1*9*11
Block 0 to 255
Device R0 to R32767
Extension file register (ZR)
*1*3*9*11
ZR0 to ZR1042431
Index register (Z) Z0 to Z15
Buffer memory (Intelligent function module) (G)
*9*11
G0 to G65535
Remote register (Ww)
*4*9
Ww0 to Ww1FFF
Hexadecimal
Remote register (Wr)
*4*9
Wr0 to Wr1FFF
The word specification of the bit device
*5
(except Timer, Counter, Retentive timer)
Setting range of each bit devices ―