Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 327 / 1224

5.4 PLC Side Setting
5 - 61
5
E
T
H
E
RNET CONNEC
T
ION
■2.
System configuration
(When the PLC side [MELSOFT Connection Extended Setting] is [Use])
Set [Ethernet] for [Controller Setting] on GT Designer3, and then connect Built-in Ethernet port CPU to the GOT.
*1 Use the product whose the first five digits of the serial No. for QnUD(P)VCPU is "17052" or later.
(1) [PLC parameter] of GX Works2
Use the GX Works2 Version1.535H or later.
(a) Built-in Ethernet
: Necessary : As necessary : Not necessary
(b) Open settings
The setting is required for all the connected GOTs.
Item Set value
Setting necessity at GOT
connection
IP address 192.168.3.1
Subnet mask pattern -
Default router IP address -
Communication data code
(Use default value)
Enable online change (FTP, MC protocol)
Disable direct connection to MELSOFT
Do not respond to search for CPU (Built-in Ethernet
port) on network
Open settings Refer to (b)
FTP settings
(Use default value)
Time settings
MELSOFT Connection Extended Setting Refer to (c)
Item Set value
Protocol UDP
Open system MELSOFT connection
1
2
<GOT>
(The settings other than the
following are set to the default)
Network No.
PLC No.
IP address
Port No.
Communication
format
: 1
: 1
: 192.168.3.18
: 5001
: UDP (fixed)
<Connecting to Built-in Ethernet
port CPU>
*1
(The following settings are set to
the default)
Network No.
PLC No.
IP address
Communication
format
: 1
: 2
: 192.168.3.1
: UDP
<Connecting to Built-in Ethernet port CPU>
*1
(The following settings are set to the default)
Network No.
PLC No.
IP address
Communication format
: 1
: 3
: 192.168.3.2
: UDP