Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 157 / 1224

3.1 Access Range for Monitoring Stations on Network Systems
3 - 3
3
ACCESS
R
ANGE FOR MONIT
O
RIN
G
(2) When connecting to QCPU (Q mode)/QnACPU/AnUCPU
• The GOT can monitor the control station and all the normal stations on the network.
• The GOT can monitor the control station and all the normal stations on other networks.
(For monitoring stations on other networks, be sure to set the routing parameter)
When the Universal model QCPU is used as a relay station, the GOT can monitor stations with the station No.65 or
later in the CC-Link IE controller network.
• When connected to a relay station and the data link system is included, the master station and local stations can be
monitored.
• When connected to a relay station, it is not necessary to designate the data link parameter [Effective unit number
for accessing other stations] for the PLC CPU of the connected station. (Even if designated, the parameter is
ignored)
• Devices of other stations (other than devices B and W that are allocated by the network parameter) may not allow
monitoring depending on their PLC CPU.
➠ ■7.
Monitor accessible range of other stations and setting method of monitor devices (Examples
1 to 2)
*1 The control station and normal station correspond to the master station and local station in the CC-Link IE field network
respectively.
GOT
Normal
station
Normal
station
Normal
station
Control
station
*1
*1
GOT
Normal
station
Normal
station
Normal
station
Normal
station
Control
station
Normal
station
Control
station
GOT
Normal
station
Normal
station
M station
L station
Control
station
Normal
station
Control
station
L station