Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 572 / 1224

9 - 48
9.5 PLC side setting when connecting to MELSEC/10
(2) Network range assignment
: Necessary : As necessary : Not necessary
*1 Be sure to set it to perform the cyclic transmission.
POINT POINT POINT
When changing the network parameter
After writing the network parameter to the PLC CPU, operate the PLC CPU ether turning OFF
and then ON or resetting.
Item Set value
Setting necessity at GOT
connection
Monitoring time 200
LB/LW setting
*1
Send range
for
each station
(LB)
Station No.1
Start 0000H
End 00FFH
Station No.2
Start 0100H
End 01FFH
Send range
for
each station
(LW)
Station No.1
Start 0000H
End 00FFH
Station No.2
Start 0100H
End 01FFH
LX/LY setting
*1
No setting
Specify I/O master station
*1
No setting
Specify reserved station No setting
Supplementary setting
(Use default value)
Station inherent parameters