Lightscape Networks mSDM-1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 102 / 136

Preventive Maintenance µSDM-1RD / µSDM-1 / µSDM-1E IOM
8-2 Lightscape Networks Ltd. Proprietary 426006-2304-013-B1
Section Procedure Frequency Platform
2.5 Save eNM configuration to hard disk
Save the current configuration
Restore an eNM configuration
Restore an eNM configuration from
remote eNM station Weekly * eNM
2.6 Save eNM configuration to floppy disk
Saving configuration files to floppy disk Weekly * eNM
2.7 Saving NEs database to a floppy diskette
Restoring NE database configuration Monthly * eNM
2.8 Modem connection and configuration As necessary eNM
2.9 Check switching to protection
Switching to protection from the eNM
Switching to protection from the eEM As determined by the
network administrator eNM, eEM
2.10 Trail reconstruction in monitor mode
(Multi-eNM management networks)
Trail reconstruction messages
Traffic reconfiguration As determined by the
network administrator eNM
2.11 Check configuration files transfer
between two eNMs As determined by the
network administrator ** eNM
* Or following major changes in network topology.
** Perform only after saving the current database configuration and when trail restoration flag is red.
8.2 Lightscape Networks Customer Service
Wherever Lightscape Networks sells, our products are backed by service. Our
service representatives stand ready to assist you at all times, whenever the need
arises. Should you require service or service information on your SDH network
products, contact Lightscape Networks International Service Center at
972-3-9266000, Fax 972-3-9266370.
Additional information can be found in the eNM by clicking the toolbar
icon in the main window. A window similar to the following (Figure 8-1) is
displayed.