manualshive.com logo in svg

Lenze i510 Series, Руководство по обслуживанию, Страница: 194 / 250

Поделиться
Скачать
Lenze i510 Series Скачать руководство пользователя страница 194

11.3.3

Keypad setpoint source

The following function is used to select the keypad as setpoint source.
Preconditions
A setpoint change-over to the keypad is only effected if no setpoint source with a higher prior-
ity has been selected. 

4

Priority of the setpoint sources

^

 193

Parameter

Name / value range / [default setting]

Info

0x2631:016
(PAR 400/016)

Function assignment: Setpoint = Keypad
(Function list: Setpoint=Keypad)

•

For possible settings see description for

0x2631:001 (PAR 400/001)

. 

^

 188

Assignment of a trigger for the "Setpoint = Keypad" function.
Trigger = TRUE: the keypad is used as setpoint source (if the trigger
assigned has the highest setpoint priority).
Trigger = FALSE: no action / deactivate function again.
Notes:

•

The default keypad setpoint can be changed in keypad operating
mode via the arrow keys of the keypad.

00 Not connected

No trigger assigned (trigger is constantly FALSE).

11.3.4

Network setpoint source

Generally, the network can be optionally set as standard-setpoint source or, after correspond-

ing configuration via a bit of the mappable NETWordIN1 data word, can be activated as set-

point source.
Preconditions
A setpoint change-over to the network is only effected if no setpoint source with a higher pri-
ority has been selected. 

4

Priority of the setpoint sources

^

 193

Details

•

In order to generally set the network as standard setpoint source, go to 

0x2860:001 

(PAR 201/001)

 and set the selection "5: Network".

•

If a bit of the mappable NETWordIN1 data word is to be used for activation, use 

0x400E:001 

(PAR 505/001)

to assign function "17: Setpoint = Network" to the corresponding bit of NET-

WordIN1. 

4

General network settings

^

 97

•

There is no specific function with a selectable trigger for a setpoint change-over to the net-

work.

Flexible I/O configuration

Setpoint change-over

Keypad setpoint source

194

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: [email protected]

Содержание i510 Series



























































































































































































































































Отзывы:

Нет отзывов