Lenze 8400 motec Series, Руководство пользователя программного обеспечения, Страница: 284 / 376

8400 motec | Software Manual
Parameter reference
Parameter list | C00721
284
L
Firmware
≤
02.00 - DMS 2.1 EN - 03/2011
C00721
C00725
C00729
C00800
C00801
C00802
Parameter | Name:
C00721 | L_DigitalDelay_2: Delay
Data type: UNSIGNED_32
Index: 23854
d
= 5D2E
h
Setting range
(min. value | unit | max. value)
0.0 s 3600.0
Subcodes Lenze setting Info
C00721/1 0.0 s L_DigitalDelay_2 : On delay
C00721/2 0.0 s L_DigitalDelay_2 : Off delay
;
Read access
;
Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1000
Parameter | Name:
C00725 | Current switching frequency
Data type: UNSIGNED_8
Index: 23850
d
= 5D2A
h
Display of the current switching frequency
• When a variable switching frequency is selected in C00018 , the switching frequency may change as a function
of the load and rotational frequency.
Selection list
(read only)
0 2 kHz
1 4 kHz
2 8 kHz
3 16 kHz
;
Read access Write access CINH PLC STOP
;
No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00729 | Keypad/PC: Speed setpoint
Data type: INTEGER_16
Index: 23846
d
= 5D26
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00800 | L_MPot_1: Upper limit
Data type: INTEGER_16
Index: 23775
d
= 5CDF
h
FB L_MPot_1 : Upper limit of the motor potentiometer function
Setting range
(min. value | unit | max. value)
Lenze setting
-199.9 % 199.9 100.0 %
;
Read access
;
Write access CINH PLC STOP No transfer COM MOT Scaling factor: 100
Parameter | Name:
C00801 | L_MPot_1: Lower limit
Data type: INTEGER_16
Index: 23774
d
= 5CDE
h
FB L_MPot_1 : Lower limit of the motor potentiometer function
Setting range
(min. value | unit | max. value)
Lenze setting
-199.9 % 199.9 -100.0 %
;
Read access
;
Write access CINH PLC STOP No transfer COM MOT Scaling factor: 100
Parameter | Name:
C00802 | L_MPot_1: Acceleration time
Data type: UNSIGNED_16
Index: 23773
d
= 5CDD
h
FB L_MPot_1 : Acceleration time of the motor potentiometer function
Setting range
(min. value | unit | max. value)
Lenze setting
0.1 s 999.9 10.0 s
;
Read access
;
Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10