manualshive.com logo in svg

Johnson Controls Tyco PowerSeries Pro HS3032, Справочное руководство

Johnson Controls Tyco PowerSeries Pro HS3032 – это надежная система безопасности для вашего дома или бизнеса. Для полного понимания её функций и возможностей, скачайте бесплатное Руководство по эксплуатации с manualshive.com. Будьте в курсе всех возможностей вашей системы безопасности!

Поделиться
Скачать
background image

Software product license

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property

laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

1. GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only one copy of the SOFTWARE PRODUCT

installed.

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run, shared or used concurrently

on or from different computers, including a workstation, terminal or other digital electronic device (“Device”). In other words, if You

have several workstations, You will have to acquire a license for each workstation where the SOFTWARE will be used.

(c) Backup Copy - You may make back-up copies of the SOFTWARE PRODUCT, but You may only have one copy per license

installed at any given time. You may use the back-up copy solely for archival purposes. Except as expressly provided in this EULA,

You may not otherwise make copies of the SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse engineer, decompile, or

disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law

notwithstanding this limitation. You may not make any changes or modifications to the Software, without the written permission of an

officer of DSC. You may not remove any proprietary notices, marks or labels from the Software Product. You shall institute reasonable

measures to ensure compliance with the terms and conditions of this EULA.

(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not be

separated for use on more than one HARDWARE unit.

(c) Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with HARDWARE, then the SOFTWARE PRODUCT is

licensed with the HARDWARE as a single integrated product. In this case, the SOFTWARE PRODUCT may only be used with the

HARDWARE as set forth in this EULA.

(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available to others or post it on a server

or web site.

(e) Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a permanent sale or transfer of the

HARDWARE, provided You retain no copies, You transfer all of the SOFTWARE PRODUCT (including all component parts, the

media and printed materials, any upgrades and this EULA), and provided the recipient agrees to the terms of this EULA. If the

SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of the SOFTWARE PRODUCT.

(f) Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to comply with the terms and

conditions of this EULA. In such event, You must destroy all copies of the SOFTWARE PRODUCT and all of its component parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any trademarks or service marks of DSC or its suppliers.

3. COPYRIGHT

All title and intellectual property rights in and to the SOFTWARE PRODUCT (including but not limited to any images, photographs,

and text incorporated into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE

PRODUCT, are owned by DSC or its suppliers. You may not copy the printed materials accompanying the SOFTWARE PRODUCT.

All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE PRODUCT are

the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and

treaties. This EULA grants You no rights to use such content. All rights not expressly granted under this EULA are reserved by DSC

and its suppliers.

4. EXPORT RESTRICTIONS

You agree that You will not export or re-export the SOFTWARE PRODUCT to any country, person, or entity subject to Canadian

export restrictions.

5. CHOICE OF LAW

This Software License Agreement is governed by the laws of the Province of Ontario, Canada.

6. ARBITRATION

All disputes arising in connection with this Agreement shall be determined by final and binding arbitration in accordance with the

Arbitration Act, and the parties agree to be bound by the arbitrator’s decision. The place of arbitration shall be Toronto, Canada, and

the installation manual of the arbitration shall be English.

- 325 -

Содержание Tyco PowerSeries Pro HS3032








































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Tyco PowerSeries Pro HS3032

KEF 3000 Series Brochure & Specs preview
3000 Series
Бренд: KEF Страницы: 10
dallmeier MDF5250HD-DN Quick Manual preview
MDF5250HD-DN
Бренд: dallmeier Страницы: 2
dallmeier PANOMERA S4 Maintenance preview
PANOMERA S4
Бренд: dallmeier Страницы: 2
Varian ProStar 335 Driver Manual preview
ProStar 335
Бренд: Varian Страницы: 55
Pure Acoustics Dream Sub Specifications preview
Dream Sub
Бренд: Pure Acoustics Страницы: 1
Insignia NS-KP01 (Spanish) Guía Del Usuario preview
NS-KP01
Бренд: Insignia Страницы: 28
GCE SAFE-GUARD-5 Instructions For Use Manual preview
SAFE-GUARD-5
Бренд: GCE Страницы: 28
EarthMinded RainStation RS-0001 User Manual preview
RainStation RS-0001
Бренд: EarthMinded Страницы: 16
Sandstrom SHFUSB10 Instruction Manual preview
SHFUSB10
Бренд: Sandstrom Страницы: 32
Paradox Esprit 738 EXPRESS Installation Manual preview
Esprit 738 EXPRESS
Бренд: Paradox Страницы: 36
JBL gto6506c Owner'S Manual preview
gto6506c
Бренд: JBL Страницы: 4
U-Prox MP LTE Manual preview
MP LTE
Бренд: U-Prox Страницы: 2
Chacon IPCAM-BE03-PS Quick User Manual preview
IPCAM-BE03-PS
Бренд: Chacon Страницы: 48
AmbiSonic Systems ALSB106RD-Black180 Installation Manual preview
ALSB106RD-Black180
Бренд: AmbiSonic Systems Страницы: 32
Pilz PNOZ ml2p Operating Manual preview
PNOZ ml2p
Бренд: Pilz Страницы: 25
Alto Trouper User Manual preview
Trouper
Бренд: Alto Страницы: 40
Leybold vacuum PhoeniXL300 Technical Handbook preview
PhoeniXL300
Бренд: Leybold vacuum Страницы: 102
Pyronix KX15DT Manual preview
KX15DT
Бренд: Pyronix Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды