Johnson Controls 40 25 TON Скачать руководство пользователя

Страница: 161 / 251

161

JOHNSON CONTROLS

5276178-JIM-C-0118

When a numeric value that can be modified is displayed,

the Default, High, and Low prompt will be shown in

the upper right portion of the display. The cursor will

be shown at the digit to be changed. The cursor will

be shown after editing has started. After the desired

numeric value has been entered, press the



key to

save the new value and exit the edit mode. Pressing

the ◄ key will fill in the default value. Edits will only

be accepted when followed by pressing the



key.

Pressing the

key while in the edit mode will cancel

the edit mode and leave the value unchanged. If an out

of range value is entered, the Default, High and Low

prompt is replaced by the “Out of Range” message for

two seconds.

When a choice value that can be modified is displayed,

the ◄ ► prompt will be shown in the upper right portion

of the display. The cursor will be shown after editing

has been started. The ◄ key or the ► key will allow

the different choices to be viewed. When the desired

choice is displayed, press the



key to save the new

value and exit the edit mode. Pressing the

key while

in the edit mode will cancel the edit mode and leave the

value unchanged.

Navigation Keys

The Navigation Keys provide a means to browse items

within a menu. The keys currently available to support

navigation are the Menu Select keys, the ▲ key, the ▼

key, the ◄ key, and the ► key.

Pressing a Menu Select key brings the user to the first

screen under that menu. The screens within each menu

are arranged in a circular list. The user may browse

through the screens using the ▲ key and the ▼ key.

Pressing the ▼ key will advance through the screens

in order from top to bottom until the bottom screen has

been reached. When the bottom screen is displayed,

pressing the ▼ key will wrap the display to the top

screen of the menu. Pressing the ▲ key will move

through the screens in order from bottom to top until

the top screen has been reached. When top screen is

displayed, pressing the ▲ key will wrap the display to

the bottom screen of the menu. Once either the ▲ key

or the key ▼ is pressed, pressing any Menu Select key

will bring the user to the first screen under that menu

(even if it is the same menu being viewed).

Navigation through the circular list of items can also be

achieved by repeated presses of the same Menu Select

key, as long as no other keys are pressed. For example,

pressing the UNIT DATA key three times will bring

the user to the third screen of the UNIT DATA menu;

pressing the UNIT DATA key once, then pressing the ▼

key, then pressing the UNIT DATA key again will bring

the user to the first screen of the UNIT DATA menu.

The ◄ key and the ► key are used to scroll “sideways”

between the same displays for each system. For

example, when viewing the Sys 1 Pressures under the

COMPRESSOR SYSTEMS key, pressing the ► key

will scroll “sideways” to the Sys 2 Pressures display and

pressing the ◄ key will scroll “sideways” to the Sys

Pressures display for the last system on the unit.

When programming numeric or non-numeric values,

the ▼ key and the ▲ key are used to scroll forward

(down) and backward (up) through the items to be

programmed or set.

Menu Select Keys

The following menu keys are available on the User

Interface; STATUS, UNIT DATA, COOLING,

COMPRESSOR SYSTEMS, SUPPLY SYSTEM,

HEATING, ECONOMIZER, VENTILATION,

EXHAUST, SETPOINTS, PROGRAM, OPTIONS,

DATE/TIME, SCHEDULE, OPERATING HOURS

/ START COUNTER, PRINT, SERVICE, and

HISTORY.

Each of the above menu keys gives access to a list of

specific items contained in that menu. To minimize

clutter, only the items applicable to the current unit

configuration will be displayed. Pressing any of the

menu select keys at any time will send the user to the

first item of the associated menu, provided the user is not

editing an item in the current menu key item or the menu

key is being used to navigate through a list of items.

Tables 69 through 77 list the information that is

contained under the STATUS, UNIT DATA, COOLING,

COMPRESSOR SYSTEMS, SUPPLY SYSTEM,

HEATING, ECONOMIZER, VENTILATION, and

EXHAUST menu selection keys of the User Interface.

The tables contain the Displayed Text, Pass Word Level

(if applicable), Range of Values (if applicable), Default

Value (if applicable), what key (Setpoints, Program,

Options) to use to change the value (if applicable), and

under what circumstances the item is displayed.

Содержание 40 25 TON




























































































































































































































































Результаты поиска

Содержание 40 25 TON

Отзывы:

Похожие инструкции для 40 25 TON

Бренды по названию

Популярные бренды

Johnson Controls 40 25 TON, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание 40 25 TON

Отзывы:

Похожие инструкции для 40 25 TON

Бренды по названию

Популярные бренды