Jands HOG 1000, Руководство по эксплуатации

Страница: 86 / 126

80
••••
HOG – Version 3.20
Monitor
Lets you choose the resolution of the monitor you have plugged in.
Press
Enter and use the cursor keys to set the resolution via the
drop down pick box. Press Enter to accept your selection. You can
choose between (None, 640 x 480, 800 x 600, and 1024 x 768)
Keyboard
Lets you select the language to match your keyboard layout.
Mem Left (kb)
Tells you how much free memory is left in the console.
Full Cues Left
This will give you an idea of how many full cues can be stored in
the remaining free memory. Note: a full cue is a cue with all
channels programmed – much larger than a typical cue – so the full
cue number will always understate the number of cues left.
AutoExec Macro
This is a “comment macro” style sequence of commands. This will
be executed after warm starts and show loads. Note: The autoexec
macro should NOT have a ‘
>
’ character at the start.
Test
Allows you to test the
AutoExec Macro
.
Default Fade & Delay times
Unless you enter a different time while programming, all cues will
automatically use these times.
Wheels %
This sets the speed of the parameter wheels. At 50%, the wheel
changes parameters at half the normal rate. At 200% the wheel
changes parameters at twice the normal rate.
Mouse %
This sets the speed of the mouse. At 50% the mouse changes
parameters at half the normal rate. At 200% the mouse changes
parameters at twice the normal rate.
Trackball %
This sets the speed of the external trackball. At 50% the changes
parameters at half the normal rate. At 200% the trackball changes
parameters at twice the normal rate.
Stay on
Set the time after which the backlighting turns off if the console
hasn’t been used. If you use 0, they will never turn off. To specify
minutes, enter the time then press
Pig and ‘ . ’.
Menu Lvl
Sets the backlight level for the menu palette LCDs. Levels range
from 0 (off) to 3 (full).
Main Lvl
Sets the backlight level for the main LCD. Levels range from 0 (off)
to 3 (full).
Hardware Control
Setting the LCD Contrast
To set the contrast on the LCD screens, hold down
Setup
button and move the centre parameter wheel to
adjust the main display, and the right wheel to adjust the menu and playback displays.
Controlling the LCD Backlighting
To set the brightness of the LCD screens, go to the Control Panel window (press
Setup
then
panel
), and
move the cursor to Menu Lvl (to adjust the menu palette LCD brightness) or Main Lvl (to adjust the main
LCD brightness). Enter the brightness level (0 to 3) or rotate the left parameter wheel to change the value.
Unfortunately, the backlighting on the LCDs will not last forever and will die out after a certain amount of
use. If the LCD screen is dark, and setting the contrast and brightness makes no difference, the backlighting
has expired and needs to be replaced. Contact your local dealer.
To make the backlighting last as long as possible, you can set them to turn off when the console is on but
hasn’t been used for some time. This is done by setting the “
Stay on
” time. This is like the screen saver
on a PC.
Stay on:
Set the time after which the backlighting turns off if the console hasn’t
been used. If you use 0, they will never turn off. To specify minutes,
add an
m
using
PIG
+ “
.
”
To restore the backlighting once it has turned off, press any button on the console. PIG is a good one to
press if you don’t want anything else to happen.
External Keyboard and Trackball/Mouse Options
The console can use any IBM-AT keyboard and Microsoft compatible serial Trackball/Mouse.