Jands HOG 1000, Руководство по эксплуатации

Страница: 34 / 126

28
••••
HOG – Version 3.20
The currently selected parameters are highlighted (Gobo, Gobo2, Fx/prism). Pressing a toolbar button takes
you straight to those parameters. Alternatively, repeated presses of the
Position , Colour or Beam
buttons advance the selection through the menu.
Linked parameters
In contrast to focus and colour, only the altered beam parameters were recorded in the cue. While it usually
doesn’t make sense to record pan without tilt or magenta without cyan and yellow, beam parameters are
best recorded separately. Regardless, these default setting can be over-ridden if necessary in the Control
Panel, allowing a pan chase to be programmed independently of a tilt chase.
Now try saving your show to disk:
1
Press the Setup key.
2
Insert a 3.5” 1.44MB floppy disk into the drive at the front of the
console.
3
Press
Save Show
.
4
Press
Okay
to confirm that you’d like to save.
5
Press
Okay
to exit save window.
Remember to SAVE OFTEN.
Recording Cues with Time
In most cases using the default fade time isn’t satisfactory and it’s necessary to enter different times. This is
easily accomplished during the programming process by pressing
Time :
1
Select fixtures and set levels.
2
Press Time 2.04 ENTER to select a fade time of 2.04 seconds.
3
Press Record and Choose button to record the cue on
the selected Master.
When Time is pressed, a window opens showing all the parameters for the programmed fixtures, like this
one for the Cyberlight: