background image

Cues, Cuelists, and Pages 

••••

 41

The page is now the current page. Any changes you make as to which cuelists are on which masters will
now affect this page.

Creating a New Page

To create a page, just press an empty page button, or press 

Page

 and an unused page number. As

elsewhere, you can name pages using 

Set

 whilst in the page directory window.

If using an HOG with no Keyboard, pressing the Menus button will bring up a keyboard on
the main menu banks.

Naming a Page

Changing the name of a page is done in the page directory window.

To change an existing page name:

1

 

Hold 

Pig

 and press 

Page

 to open page directory.

2

 

Use cursor keys and 

Set

 to select page to name.

3

 

Enter name of page using external keyboard.

4

 

Press 

ENTER

.

5

 

Press 

Okay

.

Modifying a Page

Change to the page to be modified, and either record cues into a brand new cuelist or add an existing cuelist
to the page. New cuelists are automatically added to the cuelist directory and to the current page.

To add an existing cuelist to the current page:

1

 

Open the cuelist directory by holding 

PIG

 and pressing 

List

.

2

 

Press 

Move

 or 

Copy

.

3

 

Press 

List

.

4

 

Select the cuelist by entering its number on the keypad.

5

 

Press the 

Choose

 button for the desired Master.

6

 

Press 

Okay

After a cuelist is moved onto a Master it’s still linked to the original cuelist; any changes made to it will also
affect all other uses of that cuelist in other pages.

When a cuelist is copied onto a Master, a brand new cuelist is made with no links to any other pages. Any
changes made to it will not affect other pages (unless, of course, the new cuelist is subsequently moved
onto a master in another page).

To delete a cuelist from the page, but retain it in the cuelist directory window for future use:

1

 

Press 

Delete

2

 

Press the 

Choose

 button for the Master the cuelist is sitting on.

3

 

Press 

ENTER

.

This will delete the cuelist from the page, but the cuelist will still be located in the cuelist window for future
use:

Clearing a Page

Go to the page you wish to clear. Press 

Clear Page

 in the Page Window. Note: This does not delete any

cuelists, it only removes them from the currently active page.

Содержание HOG 1000































































































































Отзывы: