Jands HOG 1000, Руководство по эксплуатации

Страница: 38 / 126

32
••••
HOG – Version 3.20
•
They automatically update. Any change in the original palette will be automatically reflected in all
cues that use it.
•
They can be named properly. These names appear across all display types.
•
Like groups, palettes can be made from any combination of fixture types. For example, a Red palette
could contain red for scrollers, VL5’s, Cyberlights, Super Scans, and Roboscan 1220’s, assuring that
colours match every time.
To create a palette:
1
Select fixtures and adjust the parameters to be included in the
palette.
2
Press Record .
3
Press the destination palette location (or type in a destination
palette number:
Position 21 ENTER ).
4
To name: press Set , type in a name, and press ENTER to name
the palette.
If you create a palette with one fixture, this setting will apply to all of the fixtures of that type. If a palette is
recorded with more than one fixture of the same type, then each fixture of that type will receive its own
value.
If you try to create a palette over the top of an existing palette, a message box labelled
“Choose edit” will pop up telling you that this item already exists and ask you to select
between
Insert, Replace, Merge
and
Cancel
.
Insert
will place the new palette in the
palette button you have chosen and push all palette buttons from this button onwards one
place to the right.
Replace
will delete the current contents of the palette button and
replace it with the information in the programmer.
Merge
combines the programmer
contents into the destination palette. If there’s a conflict, the information in the
programmer has priority. Cancel will abort the process.
Naming Palettes
To name an existing palette, open the required palette window using PIG + Position , Colour , Group or
Beam . Select the palette to name with the cursor keys, press Set and enter name followed by ENTER .
Masking
When palettes are recorded, the programmer automatically filters out parameters that are not appropriate to
that palette type. For example, if intensity is at full when creating a focus palette, the intensity will not be
included.
However, it’s possible to over-ride this masking if you want to record intensity into a Position palette, for
instance. To over-ride masking:
1
Select fixtures and adjust the parameters to include in the palette.
2
Press Record . You will see that the programmer toolbar is
replaced by the Edit Options toolbar.
3
Press the
Use I
and
Use F
option in the bottom
toolbar. This means that Colour and Beam will not be
included, but that intensity and Focus will be.
4
Press the destination palette location, eg, Position 2
ENTER .