Jands HOG 1000, Руководство по эксплуатации

Страница: 80 / 126

74
••••
HOG – Version 3.20
1
Hold down the master’s Choose button. The parameter wheel
display will change to show
Rate
and
Fade %
(the right wheel
becomes the console rate, a console-wide rate control).
2
Adjust the left (Rate in Beats Per Minute) and centre (Crossfade
in %) parameter wheels.
3
When you are happy, just let go of the Choose button and the
settings that you have made will be stored automatically. You
need press no other buttons. If you wish to re-adjust the values at
any time, just hold the
Choose button down and adjust the
values as before.
Cues inside a chase do not have to have simple default fade and delay times. You can
adjust them parameter by parameter as though they were a normal cue.
Chase settings
In the options window, you can select the chase direction:
Up
The chase runs from the first to the last step.
Down The chase runs from the last to the first step.
Ran
(Random) The chase randomly picks the next step.
Bwn (Bounce) The chase runs from the first step to the last, then back to the first, etc.
Normally the chase loops continuously. To change this:
Stop on last
: Executes the chase once and then stops.
Release on last : Runs the chase once and then automatically releases it upon completion.
Stop on first
: Runs the chase once and then returns to step one and stops.
Release on stop : Releases the chase when
Halt
is pressed.