Jands HOG 1000, Руководство по эксплуатации

Страница: 16 / 126

10
••••
HOG – Version 3.20
Fixture Selection and Patching
To select and patch the fixtures for a show, press the Setup button and then
Patch
on the top toolbar.
Adding Fixtures to the Schedule
Once you’ve opened the Patch window, first tell the console how many fixtures of each type you’ll be
using:
1
Press
Add Fix
to see a list of the fixture types
available. This opens the Change Schedule window.
2
Select a Manufacturer using the cursor keys to move
around the window and the right arrow key to make the
actual selection.
3
Select a fixture type using the cursor keys.
4
Press Set to change the number of fixtures to be used.
Use the keypad to type in the new quantity in the edit box
which appears over the current quantity of that fixture.
5
Press ENTER .
6
Repeat steps 2 to 5 for each fixture type to be used.
7
Press
Okay
to return to the Patch window.
The fixtures listed in the schedule are all contained in the ROM Fixture Library, which has personalities for
most major multi-parameter fixtures. If you aren’t able to find the fixture type, you can load it from an
older show disk, otherwise you will need to either contact your dealer to receive a fixture personality, or see
Chapter: Fixture Library to set it up yourself.
The examples in this Handbook use the following fixture schedule. You may want to set up your own
console this way and follow along.
24 Desk Channels for conventional fixtures (Dsk chan)
6 Trackspots® (Trakspot)
6 Mac500® m2 (Mac500)
6 Vari*Lite® VL5™ (Vl5 m3)
6 Vari*Lite® VL6™ (Vl6 m3)
6 Cyberlight® (Cyber m2 litho)
1 Miniscan hpe® (Minihpe)
Patching Fixtures
Now that you’ve chosen the fixtures to use, you can patch them.
In general patching fixtures is a three stage process, for example: