Jands HOG 1000, Руководство по эксплуатации

Страница: 42 / 126

36
••••
HOG – Version 3.20
Cues, Cuelists, and Pages
This chapter covers cues, cuelists, and pages. You’ll learn how to edit, copy, and work with all three items.
Manipulating Cues
Viewing Cuelists
To see a list of the cues within a cuelist, hold down Pig and press Choose button for desired fader’s
cuelist. Alternatively, you can hold down Monitor and press QList on the keypad for the current cuelist to
be displayed on the external monitor (to change between cuelists, press Choose button for desired cuelist.
If the desired cuelist is not on the current page, you will need to change pages first).
How to Select Cues During Edit Operations
Cues are selected in the same way as Groups or Palettes. After pressing the Record , Copy , Move , or
Load button:
Type in the cue number on the keypad. Unlike Groups or Palettes, there is no prior “Cue” button to push.
When you type in a number, the console assumes you are referring to cues in a cuelist on the selected
playback master (the one with the
Choose LED lit). The / key can be used to select cues on other masters.
For example, typing 2/3 ENTER would select cue 3 on playback master 2.
Modifying Existing Cues
The technique is the same as for modifying palettes:
1) use Record along with
Merge
or
Remove
,
2) use Load / Update or
3) using Update without Load (Auto Update).
The first method uses the Record button in a similar manner to the way cues are created in the first place:
1
Select fixtures and adjust parameters.
2
Press Record .
3
Press
Merge
or
Remove
on the toolbar.
4
Type the cue number and press ENTER .
Merge
combines the programmer contents into the destination cue. If there’s a conflict, the information in
the programmer has priority. It’s possible to merge into multiple cues simultaneously by entering the
destination cues on the keypad separated by
+ .
Remove
deletes selected fixtures and parameters from a cue. It is parameter specific: if the cue has all
parameters for a VL5 but only Intensity is altered in the programmer, only the Intensity parameters are
wiped out, while the other parameters remain in the cue.
The second method uses Load to bring the cue into the programmer where it can be modified directly,
before updating back to the original cue.
1
Press Load .
2
Select the cue to modify via the keypad.
3
All fixtures in the cue are automatically selected and ready for
instant modification. To only modify some fixtures, just select
them normally and only they will be changed.
4
Press Update to record the changes.
The third method uses Update on its own. Load must not be pressed for this to work.
This method is a convenient way of adjusting programming while in a live environment.