Jands HOG 1000, Руководство по эксплуатации

Страница: 26 / 126

20
••••
HOG – Version 3.20
6
Choose 4 points of a rectangle on stage which correspond
to the diagram above. The bigger the rectangle, the better.
7
Create four focus palettes – one for each point:
USR
Upstage Right X=0 Y=10
USL Upstage Left X=10 Y=10
DSR Downstage Right X=0 Y=0
DSL Downstage Left X=10 Y=0
8
Aim all moving lights at each one of the four points and
record them into the respective palettes.
9
Select each of the four focus points in turn, press Set
twice and then choose the appropriate identifier (eg, Cal
USR).
10
Press
Select
on the toolbar.
11
Press
Calibrate
.
12
Press
Position
twice to change the parameter wheels
to X, Y, Z controls for programming in 3D space.
Note: XYZ information is recorded into palettes, but not into cues. When working in 3D
space, be sure to record all positions into palettes and then build your cues from the
palettes.