Goodrive100 inverters
Keypad operation procedure
IKR Aandrijven en Besturen
www.ikr-industries.nl
codes applying 3-level menus. For example, “P08.08” means the eighth function code in the P8 group
function, P29 group is factory reserved, and users are forbidden to access these parameters.
For the convenience of function codes setting, the function group number corresponds to the first level
menu, the function code corresponds to the second level menu and the function code corresponds to the
third level menu.
1.
Below is the instruction of the function lists:
The first column
“Function code”:codes of function parameter group and parameters
；
The second column
“Name”:full name of function parameters
；
The third column
“Detailed illustration of parameters”:Detailed illustration of the function parameters
The fourth column
“Default value”:the original factory set value of the function parameter
；
The fifth column
“Modify”: the modifying character of function codes (the parameters can be modified or
not and the modifying conditions),below is the instruction:
“
○
”: means the set value of the parameter can be modified on stop and running state
；
“
◎
”: means the set value of the parameter can not be modified on the running state
；
“
●
”: means the value of the parameter is the real detection value which can not be modified.
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P00 Group Basic function group
P00.00
Speed control
mode
0: Sensorless vector control mode 0
0 is suitable in most cases, and in principle, one inverter can
only drive one motor in the vector control mode.
0
◎
