FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
C Installation Verification
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
238
No.
Check Item
Check Result
Incompliant
2
The sliding door works smoothly.
□ Compliant □
Incompliant
3
The gap between end door panels is even.
□ Compliant □
Incompliant
4
After the end door is closed, the rubber strip in the
middle seals the gap properly.
□ Compliant □
Incompliant
5
After the double revolving door is closed, the height
deviation of the two door panels is less than 5 mm.
□ Compliant □
Incompliant
6
The rotating skylights work smoothly.
□ Compliant □
Incompliant
7
The end planes of skylight connective plates are flush
with each other.
□ Compliant □
Incompliant
8
The skylight electromagnet firmly suctions the skylight
when the power is on, and the skylight drops naturally
when the power is off.
□ Compliant □
Incompliant
9
All labels are correct, clear, and complete.
□ Compliant □
Incompliant
10
There are no adhesive tape, cable ties, paper, or packing
materials left around the aisle.
□ Compliant □
Incompliant
11
The aisle is clean inside and outside.
□ Compliant □
Incompliant
12
The paint on the cabinet exterior is intact. If paint flakes
off, repaint that area to avoid corrosion.
□ Compliant □
Incompliant
Cable Installation Checklist
No.
Check Item
Check Result
1
All cable joints are secured properly, especially the
cable joints between network cables and cables
inside cabinets.
□ Compliant □ Incompliant
2
Exposed parts near the wiring terminals and lugs
are wrapped with PVC insulation tape or heat
shrinking tubing.
□ Compliant □ Incompliant
3
Flat washers and spring washers of all wiring
terminals are securely installed.
□ Compliant □ Incompliant
4
Cables are bound neatly, and cable ties are secured
evenly and properly in the same direction.
□ Compliant □ Incompliant
5
Cables are routed in a way convenient for
□ Compliant □ Incompliant
