GI-90
DUAL, TRIPLE, POKER DC Inverter : 1. General Informationi
Multi Liberty
DC Inverter
n
ADJUSTING THE VERTICAL AIRFLOW DIRECTION (HSFU X)
Heating mode
How to orient vertical airflow direction:
Press “AIR DIRECTION” button on remote controller several times, to select a fixed stop position
for airflow flaps.
The Figures below show the recommended angle for airflow flaps, according the different
operation modes.
To start automatic swinging od air outlet flaps upwards to downwards and vice versa, it is
necessary that Indoor Unit is operating.
Press “SWING ” button on remote controller: air outlet horizontal flaps will start moving as it
is shown in the Figure below.
To stop automatic swinging of air outlet flaps upwards to downwards and vice versa, press again
“SWING ” button on remote controller: horizontal flaps will stop to swing and fixed stop
position of flaps themselves will be restored.
The selected angle for airflow will be kept in memory at next restart of Indoor Unit.
Cooling mode / Dry mode
Vertical automatic swinging (“SWING”) of flaps
“SWING”
SWING
SWING
The inner electronics automatically selects the best position for the louver, according to the Indoor
Unit’s operation mode. If you desire to change this position, please proceed in the following way.
