GI-103
DUAL, TRIPLE, POKER DC Inverter : 1. General Informationi
Multi Liberty
DC Inverter
Close the doors and
the windows!
TIMER
Clean the air filters
Adjust airflow direction
Temperature adjustment
Use the curtains
ECO.
°C
POWERFUL
n
“CONSOLE” MODELS (HFIU X)
n
Set a suitable temperature value:
• During operation in Heating mode, take care not to
set a too high temperature value.
• During operation in Cooling mode, take care not to
set a too low temperature value.
n
Often clean air filters:
• In order to always assure the perfect performance of
system, clean air filters on Indoor Units at least every
2 weeks, as it is described in Section “DM: Diagnostic
& Maintenance” of this Service Manual. If dust
accumulates on air filters, the system’s performances
lower.
n
Avoid to keep doors and windows always open:
• This reduces air conditioner’s performances and
causes an increase in energy consumption.
Moreover, in case of heat overcharge, protection
functions may intervene, and consequently air
conditioner will stop.
n
Reduce exposure to sunlight:
• During operation in Cooling mode, shade by curtains
the large windows reached by direct sunlight during
the hottest hours of day.
In this way, a higher comfort will be obtained, and a
sensible reduction of energy consumption.
n
Estimate comfort real needs:
• Never use TIMER function for a time higher than
real comfort needs: please consider the time of real
presence of people inside the air-conditioned room.
• Use “ECO(NOMIC)” function or “POWERFUL”
function according to required capacity.
n
Optimize airflow direction:
• By a bit of experience, it will be possible to estimate
by yourself the increase in comfort which arises from
a correct adjustment of supplied airflow. In this way,
energy consumptions being equal, comfort degree is
remarkably increased.
