GI-3
DUAL, TRIPLE, POKER DC Inverter : 1. General Informationi
Multi Liberty
DC Inverter
1.2 ESSENTIAL FEATURES OF THESE MODELS
â
Ozone friendly R410A refrigerant
R410A refrigerant does not damage ozone at all (ODP=0), thus reducing the environmental impact of
system.
â
Advanced control for malfunction diagnosis
In case of eventual operation malfunctions, they will be shown by “Error Codes” on LED Display of
Highwall Indoor Units (HKEU X), or by codified flashings of indicators placed on frontal panel of the other
types of Indoor Units (HTFU X, HFIU X, HSFU X, HRBU X). In the end, autodiagnosis functions foresee
the display of Error Codes on LED Display integrated in each Outdoor Unit’s PCB.
All this allows targeted and therefore quicklier interventions for solving of eventual malfunctions.
â
Operation control of Indoor Units by infrared remote control (IR)
On IR remote control, there is a wide range of options, that is:
On all Indoor Units, the possibility to program Timer operation (“Timer On”, or “Timer Off”) of system
- also in combined way (Timer On followed by Timer Off, or vice versa) - within max. 24 hours.
On Highwall Indoor Units (HKEU X), “SLEEP” function allows automatic gradual adjustment of set
temperature, for reaching a higher comfort degree during rest.
On Cassette type (HTFU X), Console type (HFIU X), Ceiling/Floor type (HSFU X) and Low Ducted
type (HRBU X) Indoor Units, “ECO(NOMIC)” or “Energy Saving” function, (fan turns at Low speed),
allows to save energy consumptions and reduce operation noise level, for reaching a higher comfort
degree during rest.
On the contrary, if you need to reach temperature value set by remote control quicklier, on Highwall
Indoor Units (HKEU X) it is available “TURBO” function, while on Console Indoor Units (HFIU X) it is
available “POWERFUL” function. In both cases, Indoor Units operate in powerful mode.
On all Indoor Units, except HRBU X Models, “SWING” function (automatic swinging of air outlet flaps)
allows a better distribution of air supplied in the room by Indoor Unit, by orienting the airflow upwards
to downwards and vice versa.
Moreover, on Ceiling/Floor Indoor Units (HSFU X), it is available the function of automatic swinging of
air outlet flaps from right side to left side and vice versa (“WIDE ANGLE”), for allowing a better distribution
of air supplied by Indoor Unit, in horizontal direction too.
On Highwall Indoor Units (HKEU X), “FOLLOW ME” function (activation of room temperature sensor
integrated in IR remote control, instead of Indoor Unit’s sensor), allows to obtain adjustment of room
temperature according to comfort needs of people inside the room.
â
Automatic restart of Units after a power failure
All types of Indoor Units are able to restart according to the settings that were selected before the
