Order No. 2104 ..
Value transmitter
function = "Light scene
extension without
memory function"
Transmit light scene
number on
rising edge (push-button
as NO contact)
falling edge (push-button as
NC contact)
rising and falling edge
(switch)
Specifies the edge which starts an
actuation.
Light scene on rising
edge(1...64)
1
...64
Specifies the light scene transmitted on
a rising edge.
Only with "Transmit light scene number
on = rising edge (push-button as NO
contact)" and "Transmit light scene
number on = rising and falling edge
(switch)"!
Light scene on falling
edge(1...64)
1
...64
Specifies the light scene transmitted on
a falling edge.
Only with "Transmit light scene number
on = falling edge (push-button as NC
contact)" and "Transmit light scene
number on = rising and falling edge
(switch)"!
Behaviour after bus
voltage
return
no reaction
Reaction as rising edge
Reaction as falling edge
Transmit current input
status
It is possible to specify which reaction
should take place after bus voltage
return. If a delay after bus voltage return
is configured, this time must first have
elapsed before the pre-set reaction is
executed here.
With "no reaction", no reaction occurs.
With "Reaction as with rising edge", the
light scene parameterized for the rising
edge will be transmitted.
Only with "Transmit light scene number
on = rising edge (push-button as NO
contact)" and "Transmit light scene
number on = rising and falling edge
(switch)"!
With "Reaction as with falling edge", the
light scene parameterized for the falling
edge will be transmitted.
Only with "Transmit light scene number
on = falling edge (push-button as NC
Page 151 of 171
Software "KNX CO2 sensor"
Parameters
Содержание CO2-Sensor
Страница 42: ...Order No 2104 Figure 7 CO2 concentration Page 42 of 171 Software KNX CO2 sensor Functional description...
Страница 74: ...Order No 2104 Page 74 of 171 Software KNX CO2 sensor Functional description...
Страница 165: ...Order No 2104 See channel 1 Disable Page 165 of 171 Software KNX CO2 sensor Parameters...
