GE FL000090, Руководство по обслуживанию

Страница: 240 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
3-172 Section 3-10 - Connectivity Setup
5.) If required, access the
System Configuration
utility, as follows:
a.) Make sure the System Configuration tab is activated as shown in Figure 3-186 .
System Configuration read-only information is displayed (in table format) under the following
column headings:
Item , Value , Minimum Requirements.
Below this information, the
eVue Operation Utility
buttons enable the user to enable or
disable the eVue mode, as required. An additional button (
Configure eVue
) is used to perform
the eVue configuration procedure.
Note:
In order to enable eVue operation, it is necessary to first perform the eVue configuration
procedure as described in the following step.
b.) Configure eVue (if required), as follows:
Click the
Configure eVue
button. The Configuration dialog box opens:
Figure 3-186 MPEGVue Patient Manager Window - System Configuration Tab