GE FL000090, Руководство по обслуживанию

Страница: 272 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
4-24 Section 4-3 - Functional Checks
8
When done, press
OK
to close all windows.
LCD PIXEL TEST:
1
Boot-up the System in Regular Scanning Mode
2
Press
Alt +Config
to start the diagnostic package
3
From the diagnostic test tree, select
BEP
.
This will activate PC Doctor diagnostics.
4
Run
System Diagnostics\Monitor Test
5
Select
Solid Test
. No missing pixels in R/G/B tests
6
Select
Red
Make sure there are no missing pixels in the Full Screen
Red or display in another color
7
Select
Green
Make sure there are no missing pixels in the Full Screen
Green or display in another color
8
Select
Blue
Make sure there are no missing pixels in the Full Screen
Blue or display in another color
9 When done, press
Close
The system will prompt: Did the test pass?
Respond accordingly.
EXTERNAL MONITOR TEST:
1
Connect the external monitor to the system
2
Boot-up the System in Regular Scanning Mode
3
Press
Config
4
Under the
Connectivity
tab, select
TCPIP
5
Select
Advanced
6
In the address bar, type
Controlbar
and press
Enter
7
From the Control Panel, select
Display
then select
Settings
8
From the
Settings
Tab, select
Advanced
. Select
S3Display
tab
Make sure the CRT check box is activated.
9
When done, press
OK
to close all windows.
Table 4-11 Monitor Test (cont’d) - Recommended
Step Task Expected Result(s)