GE Corometrics 126, Руководство по обслуживанию

Страница: 155 / 440

Revision B 120 Series Maternal/Fetal Monitor 5-11
2015590-001
Setup Procedures: Maternal NBP Setup Screen
Maternal NBP Setup Screen
Select the
NBP
softkey to display the NBP Setup screen ( Figure 5-3 ). For
information on settings, refer to Appendix A, “Factory Defaults” .
Figure 5-3. Maternal NBP Setup Screen
Display Timer
This field determines the time period, in minutes, that a blood pressure reading
remains displayed before being automatically erased, starting from the time the
reading is displayed.
NOTE:
Values are removed from the NBP area of the display only; values are still
retained in memory for display and printing of the maternal Vital Signs
History screen.
This feature reduces the chance of error. For example: if the monitor is configured
for manual mode and one hour has elapsed since the last reading, the continuous
display of the “old” NBP reading may cause confusion.
Mode
This field alternates between the manual and automatic monitoring modes for
maternal blood pressure. For auto mode, this field also sets the interval time, in
minutes, between automatic blood pressure determinations. This interval time is
measured from beginning to beginning of determinations. (Refer to the 120 Series
Operator’s Manual for exceptions to this rule.)
The monitor is factory-set with the optional 1-minute interval time disabled. Refer to
“NBP One-Minute Interval” on page 5-28 for information on enabling the 1-minute
interval.
NOTE:
As soon as the auto mode is selected on the setup screen, the countdown
timer begins to decrement. The first automatic determination begins after
expiration of one complete interval time period.