background image

SPEC.  SHEET NO. GR-800E-2-00102/EX-04

CRANE SPECIFICATIONS 

CRANE CAPACITY 

80,000 kg at 3.0 m

BOOM 

5-section,  12.0 m - 47.0 m

DIMENSION 

Overall length

approx.

14,375 mm

Overall width

approx.

3,315 mm

Overall height

approx.

3,795 mm

MASS 

Gross vehicle mass

approx.

51,410 kg

front axle

approx.

24,325 kg

rear axle

approx.

27,085 kg

PERFORMANCE 

Max. travelling speed

computed

36 km/h

Gradeability(tan )

computed

94 % (at stall)

GENERAL DATA 

HYDRAULIC ROUGH TERRAIN CRANE

Left  hand  steering 

*Machine should be operated within the limit of engine crankcase

 design (17˚ : MITSUBISHI 6M60-TL)

*30 %

GR-800EX

ELEVATION

By a double-acting hydraulic cylinder, fitted with a holding valve.

Automatic speed reduction and slow stop function.

Boom angle…………………… -1.5˚ to 80.5˚

Boom raising speed...........….. 20˚ to 60˚ in 46s

HOIST-Main winch

Variable speed type with grooved drum driven by hydraulic

axial piston motor through winch speed reducer.  Power load

lowering and hoisting.  

Equipped with automatic brake (neutral brake) and 

counterbalance valve.  

Controlled independently of auxiliary winch.

 

Single line pull ..................64.7 kN {6,600 kgf}

 

Single line speed(High)....149 m/min (at the 4th layer)

 

Single line speed(Low) ....107 m/min (at the 4th layer)

 

Wire rope..........................No-spin type

 

Diameter x length .............19 mm x 250 m

HOOK BLOCK(Optional) - 80 t capacity

7 sheaves, swivel type hook with safety latch.

HOOK BLOCK(Optional) - 50 t capacity

5 sheaves, swivel type hook with safety latch.

HOOK BLOCK(Optional) - 35 t capacity

3 sheaves, swivel type hook with safety latch.

MODEL

GR-800EX

CAPACITY

80,000 kg at 3.0 m

BOOM

5-section full power partially synchronized telescoping boom of 

round  box construction with 6 sheaves at boom head. 

The synchronization system consists of 2 telescope cylinders, 

extension cables and retraction cables.

Hydraulic cylinders fitted with holding valves.

 

Fully retracted length ......................12.0 m

 

Fully extended length ..................... 47.0 m

 

Extension speed .............................35.0 m in 160 s 

JIB

2-staged swingaround boom extension. 

Triple offset (3.5˚/25˚/45˚) type.  

Stows alongside base boom section.

Assistant cylinders for mounting and stowing.

Single sheave at jib head.

 

Length.............................................10.1 m and 17.7 m

SINGLE TOP (AUXILIARY BOOM SHEAVE)

Single sheave.  Mounted to main boom head for single line work.

Содержание GR-800EX

















Отзывы: