FR500A&FR510A Series Vector Control Inverter
- 20 -
Fig.3-4 Multiple inverters installed Upper and lower mounting direction and space
Table 3-1 Requirement of minimum mounting clearances
Drive model
Mounting clearances (mm)
A
B
4
～
22kW
≥50
≥100
3.3 Fixed manner
a. Wall installation
Wall mounting dimensions refer to Chapter II
（
table 2-3
），
As shown in Fig drilling four holes in
the mounting surface
，
Put the inverter against the panel and mate 4 holes, and then tighten screws in
the 4 holes tighten any of the 2 screws in diagonal position, tighten 4 holes with screws for
strengthened installation.
Hole A
Hole A
Hole A
Hole A
Fig.3-5 Wall mounting
b. Wall mounting
4
～
22kW Install the drive mounting bracket as shown in FIG 3-6(a). Wall installation dimensions
refer to Chapter II
（
table 2-4
），
As shown in Fig drilling four holes in the mounting surface
，
Put the
inverter against the panel and mate 4 holes, and then tighten screws in the 4 holes tighten any of the 2
screws in diagonal position, tighten 4 holes with screws for strengthened installation.
Hex nuts
Place the hex
nut groove
Mounting Bracket
M5 screw
Through the corner four
M5 screw fastening machines
Mounting panel
The machine Components
Hole B Hole B
Hole B
Hole B
Fig.3-6 4
～
22kW Wall installation
