FR500A&FR510A Series Vector Control Inverter
- 21 -
Do not take the sunken screws as shown in the
picture. Otherwise, inverter may be damaged
Take screws combined with springs and plain gaskets to
Install inverter.
3.4 Remove & Mount Keypad and Cover
a. Remove keypad: Disassemble keypad. See following Figure: Push the buckle on the
keypad in
Direction 1 first, and then lift up the keypad in Direction 2.
b. Mount keypad: Assemble keypad. See following Figure: Place keypad in the slot in Direction 1,
and then press the keypad in Direction 2 until it clicks into right place.
1
1
2
Fig.3-7(a) Remove keypad
Fig.3-7(b) Mount keypad
c. External remote operation panel operation method: Remove the operation panel as shown in fig
3-7(a)
，
Then connect the crystal head out from the socket
，
Placed in the side of the graphic fixed card
slot
，
use the wiring operation panel can be used.
