Fibocom L860-GL Скачать руководство пользователя страница 114

Страница: 114 / 254

FIBOCOM L860 AT Commands User Manual

Page 114 of 254

Command

Description

Test

[Function]

Test command returns values supported as a compound value.

[Syntax]

AT+CUSATR=?

[Response/Action]

+CUSATR: (list of supported <profile_storage>s)

Parameters

<profile_storage>

Is an integer type.

0 TE profile that can be set with +CUSATW.

1 MT profile that can be set with +CUSATW.

2 MT default profile that reflects the inherent, default supported facilities of the MT.

3 UICC profile that reflects the currently active UICC profile that was sent to the UICC

the last TERMINAL PROFILE command.

4 UICC EFUST. The elementary file that indicates services available in the USIM.

5 List of MT only facilities (facilities that are not allowed to be assigned to the TE, see

3GPP TS 31.111 [92]).

Is string type in hexadecimal character format. The profile describing the supported

facilities of the referenced <profile_storage> as specified for the Terminal Profile in

3GPP

TS 31.111 [92] or for the related EF in 3GPP TS 31.102 [59].

Example

Reference

3GPP TS 27.007

7.1.2 +CUSATW, Write USAT Profile

This command is used to write USAT profile.

Upon an attempt to store or reset a profile that conflicts with an already stored profile or the list of MT only

facilities, the operation fails and the profile referred to by command parameter <profile_storage> remains

Содержание L860-GL































































































































































































































































Результаты поиска

Содержание L860-GL

Отзывы:

Бренды по названию

Популярные бренды

Fibocom L860-GL, Руководство пользователя по командам

Результаты поиска

Содержание L860-GL

Отзывы:

Бренды по названию

Популярные бренды