Excalibur ISX 5312, Руководство по эксплуатации

Страница: 68 / 228

Excalibur ISX 5312/5314 T-1 Multiplexer Installation and Operation
4-4
3. To change the current setting, press the button beneath the desired setting. The
top line of the screen then displays the revised setting. The revised setting takes
effect immediately after it is selected, except for screens displaying the word
Acc
on the bottom line.
1 2 3 4
E scape To p
L
D S U L o c a t i o n = R e m o t
C e n t r R e m o t
L
D S U L o c a t i o n = C e n t r
C e n t r R e m o t
<
>
4. Press the Escape button. You can then define another parameter within the
same submenu.
Several parameter screens display the words
Inc
,
Dec
,
Cpy
, and
Acc
on the bottom line.
For example:
L
L o c a l A d d r e s s = 0 2
I n c D e c C p y A c c
C
To change this parameter, you must increase or decrease its current value (rather than
select from a list of possible options). When this type of screen is displayed, a cursor
appears beneath the leftmost digit. To increase its value, press the button beneath
Inc
; to
decrease the value, press the button beneath
Dec
. To copy a character into the next
space, press the button beneath
Cpy
. When you change the value of a digit, a reverse-
video
C
appears in the lower right corner of the screen. To move the cursor to the next
digit, press the > button. When the desired value is displayed on the top line, press the
button beneath Acc to enter the value into memory. The reverse-video C disappears
when the entry has been accepted. For simplicity, the rest of the screens illustrated in
this chapter do not show the reverse-video
C .