Excalibur ISX 5312, Руководство по эксплуатации

Страница: 120 / 228

Excalibur ISX 5312/5314 T-1 Multiplexer Installation and Operation
4-56
5. To increase the first digit, press the 1 button; to decrease it, press the 2 button.
Press the < and > buttons to move from space to space.
1 2 3 4
E scape To p
L D S 1 a 1 t o D S 1 b 0 1
I n c D e c R = n A c c
<
>
6. When the desired assignment is displayed, press the button beneath Acc . If you
try to assign a channel that is already assigned, the bottom line of the screen
displays the message:
Conn to used channel . If you want to change the channel
assignment, you must first disconnect the channel by selecting
None
.
1 2 3 4
E scape To p
L D S 1 a 1 1 t o D S 1 b 1
I n c D e c R = n A c c
<
>
7. The screen displays the DS1a channel assignment parameters with the cursor
located under the leftmost digit. To assign contiguous channels, you must have
R=y
displayed on the bottom line. If
R=n
is displayed, press the 3 button to
change the setting and display the contiguous channel assignment parameters.
1 2 3 4
E scape To p
L D S 1 a 1 - 0 1 t o D S 1 b 0 1
I n c D e c R = y A c c
< >
The top line of the display shows, from left to right, four fields, that indicate the
following:
•
01
(first field) - indicates the initial DS1a DS0 channel number to be
assigned. The available options are 01 through 24 .
•
01
(second field) - indicates the final DS1a DS0 channel number to be
assigned. This number must be higher than the number selected for the first
field. The available options are
01
through
24
.