Proservo NMS5
Hauser
95
10.7
Return
The following procedure must be performed before returning NMS5 transmitter to Hauser e.g. for
repair or calibration.
•
Remove all residue. Pay special attention to the gasket grooves and crevices where fluid may be present.
This is especially important if the fluid is corrosive, poisonous, carcinogenic, radioactive, or otherwise
hazardous.
•
Always enclose a duly completed "Declaration of Hazardous Material and De-contamination" form (a copy
of the “Declaration of Hazardous Material and De-contamination” is included at the end of this operating
manual). Only then can Hauser transport, examine, and repair a returned device.
•
Enclose special handling instructions if necessary, for example a safety data sheet as per EN 91/155/EEC.
Additionally specify:
•
An exact description of the application
•
The chemical and physical characteristics of the instrument
•
A short description of the error that occurred (specify the error code where possible)
•
Operating time of the device
Caution!
•
Hazardous materials may be attached to damaged parts of NMS5 or its plastic material. Unless hazardous
materials are completely removed from NMS5, no repair request is accepted.
•
Incomplete cleaning of the instrument may result in waste disposal or cause harm to personnel (burns, etc.).
Any costs arising from this will be charged to the operator of the instrument.
10.8
Disposal
In case of disposal, separate the various components according to their materials.
10 Diagnosis and Troubleshooting
