Proservo NMS5
48
Hauser
6.3
Access Code
The access code is to ensure the confidentiality of the setup data. Three security levels are available along with
access codes.
The higher levels include the lower ones. e.g. If access code 50 is specified for a function, then code 51 also
enables editing. A function that requires access code 51, on the contrary, cannot be edited by code 50.
However, 777 is only used to change I.S. terminal configuration.
Figure. 51:
Order code which require Access Code 777
Setting Access Code
Security Level
Access Code
0
None
1
For Operator
50
2
For Engineer
51/530/777
Item
Procedure
Remarks
Static Matrix
Figure. 52:
Access Code
1. At the static matrix "MORE
FUNCTION", select
GVH=039 "ACCESS
CODE"
2. The default value is "0".
Touch the "+" key.
3. The first digit increases to 9,
then the second digit
increases. Stop touching "+"
once you reach "50".
4. "50" is blinking. Gently
touch "+" key again to
change the first digit from 0
to 1. Now you have "51".
5. Here touch "E"; "EDITING
ENABLE" will be displayed.
•
When touching "E" while
displaying an access code
except 0, 50, or 51
"EDITING LOCKED" will
appear.
•
If an access code has not
been selected before
performing any settings, the
screen will automatically
change to show
"ACCESS CODE"
•
Operation Commands can
be sent, and displayed data
read, by remote systems,
depending on your
NMS5 specification.
NMS5-
X
X
X
X
X
X X
X
X
X
X
J
N
N
P
F
A
J
B
C
D
E
G
MORE
FUNCTION
ACCESS CODE
039
6 Operation
