Endress+Hauser Proservo NMS5, Руководство по эксплуатации

Страница: 144 / 162

Proservo NMS5
144 Hauser
Matrix group
Function group
Item
Access code
Short description
Default value
Set Select Display
Possible settings, selection, or display
Index No, GVH
ADJ. SENSOR
Select units for temperature data displayed locally at NMS/NRF
UNIT
LEV. UNIT (HOST)
TEMP UNIT (HOST)
DEN. UNIT (HOST)
Select display units for level value data to be sent to host CPU via remote communications
760 761
LEV. UNIT
TEMP. UNIT DEN. UNIT
Select units for temperature value data to be sent to host CPU via remote communications
Select display units for density value data to be sent to host CPU via remote communications
Select units for level value data displayed locally at NMS/NRF. Select units for density value data displayed locally at NMS/NRF
51 51
mm
°C
g/mL
51
mm
°C
g/mL
51 51 51
Select
Select Select Select Select Select
m, inch, cm, ft
°C, °F, °R, °K Kg/m , lb/gl, SGU, Kg/l, g/l, lb/in, st/y
3
3
m, inch, cm, ft
°C, °F, °R, °K
Kg/m , lb/gl, SGU, Kg/l, g/l, lb/in, st/y
762 765
766 767
HART LINE
NMT
770
Select Terminal Port A (Ex ia) or Terminal Port B (Ex d) for the NMT connection
15
Set
771
Set
772
Set
INTERFACE ADJUST
BALANCE COUNT
IF 2 OFFSET
777
780
781 782 783
784
HART DEVICE (1)
HART DEVICE (2)
777 777 51
Set Volume Tolerance for Balance condition during Interface measurement Used for Interface Measurement. Increase Brake Rate to make the balance zone smaller and decrease interface measurement time.
ࠉ
0.0 mm
0.0 mm
Set
Display
Display
Display Display
VOL. TOL. FOR I/F BRAKE RATE IF 1 OFFSET
Select Terminal Port A (Ex ia) or Terminal Port B (Ex d) for the HART Device 1.
Select Terminal Port A (Ex ia) or Terminal Port B (Ex d) for the HART Device 2.
51
51 51
51
Used for Interface Measurement. Balance signal is generated after MOTORMOVEMENTCHANGESFROMFASTTOSLOWSPECIlEDNUMBEROF times. Coordinate this setting with G2V9H9 Balance Delay setting.
Change this setting to correct Interface 1 level deviation.
Change this setting to correct Interface 2 level deviation.
TERMINAL PORT B TERMINAL PORT B TERMINAL PORT B
TERMINAL PORT B TERMINAL PORT A TERMINAL PORT B TERMINAL PORT A TERMINAL PORT B TERMINAL PORT A
0.3 mL
150
0 - 99.9 mL
0 - 255 0 - 255
0 - 9999.9 mm 0 - 9999.9 mm
ADJ A ZERO ADJ A ZERO ADJ B SP
AN
ADJ B SP
AN
530
530
530
530
Hall Sensor A Zero signal Hall Sensor A Zero signal
Hall Sensor B Full span signal
Hall Sensor B Full span signal
Display
Display Display Display
740 741 742
743
ADJ. SENSOR
HAR
T ERROR RA
TE
ERR. RA
TE NRF
ERR. RA
TE NMT
ERR. RA
TE DEV(1)
ERR. RA
TE DEV(2)
530 530 530
530
Communication error rate
Communication error rate
Communication error rate Communication error rate
Display
Display Display Display
750
751 752
753
13 Matrix