Proservo NMS5
154
Hauser
14.2
Measurement Wire Replacement
Procedure for Winding Wire onto Wire Drum
1.
Prepare a box with approx. 300mm(w) × 300mm(d) × 50mm(h) for wire storing.
2.
Take out the measurement wire from the plastic bag.
3.
Put the wire into the box without twisting.
4.
Put one end of the wire into a hole on the wire drum groove.
5.
Fix the end of the wire by a screw.
6.
Sit down on a chair.
7.
Grasp the wire drum by left hand and hold the wire by left thumb.
8.
Hold the wire by right thumb and index finger.
9.
Make tension to secure the wire, so as not to come out of the groove.
10. Rotate the wire drum to wind the wire into groove with holding by left thumb.
This completes the winding wire onto wire drum procedure.
Figure. 108: Measuring Wire
Wire Hole
Hole
Screw
14 Appendix
