background image

Software Update 

(CN34)

This document contains instructions for updating the system software of the Kawai CN34 digital piano.

Please read these instructions thoroughly before attempting to perform the software update.

„

Checking the software version

To check the current software version installed on the CN34, 
press and hold the 

PIANO1

ELECTRIC PIANO

, and 

HARPSI & 

MALLETS

 buttons simultaneously, then turn the instrument on.

The current software version will be shown in the LCD display.

If the version number is 

greater than

 or equal to the update 

version, no further action is necessary.

* Turn the instrument off and on to return to normal operation.

If the version number is 

lower than

 the update version, please 

continue to follow the instructions below.

1. Prepare the USB memory device

Copy the 

CN34_040.SYS

 update file to the root folder of a USB 

memory device.

* The USB device should be formatted to the ‘FAT’ or ‘FAT32’ filesystem.

2. Connect the USB memory device

While the instrument is turned off:

Connect the prepared USB memory device to the USB port.

3. Start the update

Press and hold the 

CHOIR & PAD

,

 BASS

, and 

OTHERS 

buttons 

simultaneously, then turn the instrument on.

The update process will start automatically after a few seconds, 

and status messages will be shown in the LCD display.

* Do not remove the USB memory device while the software update is 

in progress.

4. Finish the update, disconnect the USB memory device

After approximately 1 minute, a message will be shown in 

the LCD display, indicating that the software update has been 

successful.

Disconnect the USB memory device, then turn the instrument 

off and on.  The updated software will be used automatically.

* If the software update is unsuccessful, restart the process from step 1.

Dest: Ver# : CS
(CD)

V1.03

DC8B

Version number

Flash Programing
by USB Memory

CN34_040.SYS
Boot End

hold

hold

hold

hold

hold

hold

Отзывы: