Security
multi N/C 2100S (duo, pharma)
10
2
Security
For your own safety and to ensure error-free and safe operation of the device, please
read this chapter carefully before commissioning.
Observe all safety instructions listed in this user manual and all messages and infor-
mation displayed on the monitor by the control and analysis software.
2.1
Safety labeling on the device
Warning and mandatory action labels have been attached to the device and must al-
ways be observed.
Damaged or missing warning and mandatory action labels can cause incorrect ac-
tions leading to personal injury or material damage. The labels must not be removed.
Damaged warning and mandatory action labels must be replaced immediately!
The following warning and mandatory action labels have been attached to the de-
vice:
Warning symbol
Meaning
Comment
Warning against hot
surface
¡
On the furnace, on the furnace
cover:
¡
On the left side wall:
Risk of burns from the hot furnace
Warning against corro-
sive substances
¡
On the front side, next to the
phosphoric acid bottle: Warning
against phosphoric acid
Warning against harm-
ful or irritating sub-
stances
¡
On the front side: Warning
against phosphoric acid
Warning against crush-
ing
On the autosampler: There is a risk of
injury in the movement range of the
autosampler.
Hazardous substances are used during operation:
GHS labeling
Meaning
Comment
Corrosivity warning
On the phosphoric acid bottle: Phos-
phoric acid is corrosive
Mandatory action
labels/information
symbols
Meaning
Comment
Disconnect the power
supply before opening
the device cover.
On the side parts and the rear of the
device: Before opening the device
cover, switch off the device and dis-
connect the mains plug from the
mains socket.
