EFI E-85A, Инструкция по установке и обслуживанию

Страница: 87 / 143

87 Installation and Service Guide: Color Controller E-85A
Replacing parts
4
Connect to the printer (see page 21 ).
5
Power on the E-85A (see page 40 ).
If the E-85A does not start, see startup problems in “Table 6: E-85A error messages and conditions” on page 113.
6
Print the Test Page and the Server Configuration page ( page 29 ).
If the Test Page does not print, verify that the printer interface cables are securely connected and on the correct ports;
verify that the printer interface board is securely connected to the motherboard; look up printing problems in
“Table 6: E-85A error messages and conditions” on page 113.
If image quality is poor, test the printer (see the service documentation that accompanies the printer).
7
Connect to the network (see page 23 ).
8
Ask the site administrator to download a test job over the network.
If the job does not print or has poor image quality, look up print problems in “Table 6: E-85A error messages and
conditions” on page 113 and the user documentation Troubleshooting topics.