107
Installation and Service Guide: Color Controller E-85A
Troubleshooting
•
The upper LED next to the 10/100/1000 Mbps network port is blinking to indicate network activity (see
).
Figure 44:
E-85A connector panel
If all the connectors are properly in place and the power is on, proceed to the next stage of troubleshooting.
1
Power connector
6
Printer interface port
2
Power switch
|: Power ON
O: Power OFF
7
Additional printer interface board (optional)
8
Type B USB port for the printer interface board (
3
Type A USB2.0 ports
9
OFF/ON switch for power synchronization
ON: Right
OFF: Left
4
Type A USB3.0 ports (when installed on furniture option,
these ports are exclusive for USB ports on the proximity
sensor unit)
10
DVI port (monitor)
11
HDMI port (monitor)
5
Network port (Upper RJ-45)
12
VGA port (monitor)
Note:
Unlabeled connectors/ports are not used.
Note:
The monitor port configuration may vary. Use an
appropriate port that matches your monitor port and cable.
1
2
3
4
5
6
7
9
8
11
10
1
2
3
4
5
6
7
9
8
11
10
12
