EFI E-85A, Инструкция по установке и обслуживанию

Страница: 128 / 143

128 Installation and Service Guide: Color Controller E-85A
Troubleshooting
Printing (continued)
E-85A appears on the list of
printers on the customer’s
workstation, but certain jobs
do not print. PostScript error 1 Make sure that Print to PostScript Error in Setup is set
to Yes.
2 Check for error messages on the E-85A output.
Application problem 1 Print a job from a different application to determine if
the problem is associated with a particular application.
2 Make sure that the connection between the E-85A and
the workstation is working by downloading a Test
Page from the workstation or printing a simple file,
such as a text file.
3 Resend the problem file.
Server Configuration page is
completely or mostly blank. One of the following:
•
Missing, unmatched, incorrect, or
faulty DIMMs
•
Corrupt system software
1 Check for missing DIMMs and reseat the DIMMs to
remove any oxidation on the connectors (see page 69 ).
2 If the problem persists, test the DIMMs by removing
all DIMMs except for the ones installed in A0 and E0
and reboot the system.
If the system boots to Idle, install a different DIMM in
the available slot indicated in
“Table 3: Available
DIMM slots” on page 70 and reboot the system.
Continue to install a different DIMM in the slot and
reboot the system until the system fails to reach Idle.
The last DIMM that you installed may be faulty and
should be replaced.
Note:
If the system fails to reach Idle with each DIMM
installed in the next available slot, the DIMM socket may
be faulty and you may need to replace the motherboard.
3 If the problem persists, restore the backup, or reinstall
the system software.
Symptom Possible cause Suggested action