25
Installation and Service Guide: Color Controller E-85A
Installing hardware
Configuring a static IP address for the E-85A
If the customer requires the E-85A to be configured with a static IP address (for example, in a non-DHCP network
environment), obtain a valid static IP address from the site administrator and configure the E-85A as described in the
following procedure.
To configure a static IP address for the E-85A
1
Press
Home
button on the printer operational panel.
2
From the
Home
screen of the printer touch panel, select
Fiery
. If the Fiery icon does not display, press the button on the
upper right corner of the screen to switch to the icon view.
3
Press the
Fiery
tab.
4
Press
Setup
.
5
On the Login screen, press
Password
. Enter
Fiery.1
. Press
OK
.
Type
Fiery.1
exactly as shown. The password is case-sensitive; for example,
fiery.1
will not work.
6
On the Setup screen, do the following:
•
Press WINS. If enabled (yellow), press
Use WINS
to disable this feature. Press
Save
.
•
Press DNS. If enabled (yellow), press
Get DNS address automatically
to disable this feature. Press
Save
.
•
Press
IP Address
. Enter an IP address. Press
Save
.
•
Press
IPv4 Address
. Press
Manual Configuration
.
7
On the
Manual Configuration
screen, do the following:
•
In the
IP Address
field, enter an IPv4 address. Press
OK
.
•
In the
Subnet Mask
field, enter a subnet mask IP address. Press
OK
.
•
In the
Default gateway
field, enter a default gateway IP address. Press
OK
.
•
When done, press
Save
. Press
Go Back
.
8
On the
Setup
screen, press
Exit Setup
.
9
Press
Reboot Now
.
To configure a static IP address for the E-85A using the Fiery QuickTouch
1
On the Fiery QuickTouch display screen, press the
Quick launch
icon on the bottom-left corner.
2
Select
Settings
, and log in to the server as
admin
user (the default password is
Fiery.1
).
3
Select
Configure IP Address
, and select IP
Address
,
DNS
,
Subnet Mask
,
WINS
, and
Default Gateway
, as necessary.
4
Save the settings and exit.
