Using the E-85A
You can access the E-85A by using the Fiery QuickTouch
TM
. You can shut down, restart, or reboot the E-85A as well
access other functions.
•
The printer touch panel (see
•
Fiery NX Station, including a monitor, keyboard, and mouse.
•
The Fiery QuickTouch, a seven-inch LCD color touch screen interface for the E-85A.
Fiery Ticker
When you log on to the E-85A using the monitor or Remote Desktop Connection, Fiery Ticker automatically starts
showing the status bar.
Figure 10:
Fiery Ticker status bar
You can perform the following tasks using the Fiery Ticker:
•
Monitor the activities of the E-85A and printer using the Fiery Notes.
•
Manage the E-85A by using Command WorkStation or WebTools
•
Shut down, restart, or reboot the E-85A
For details, see the Fiery Ticker Help. To access the Fiery Ticker Help, click “>>” icon at the upper left corner of the
screen, and select
Help
.
Printing E-85A pages from the monitor, keyboard, and mouse
This section describes how to print the Test Page, Server Configuration page, and other Fiery pages.
•
Test Page
verifies that all components of the E-85A-to-printer interface work. The Test Page is a color file that resides
on the E-85A hard disk drive.
Note:
Information regarding Test Page refers to PS Test Page or PCL Test Page. For more information, see
Configuration and Setup
, which is part of the user documentation set.
•
Server Configuration page
provides general information about the hardware and software configuration of the E-85A,
the customer’s current settings for Setup, the current calibration, and the IP address of the E-85A.
Printing the Server Configuration page can be helpful during installation, Setup, and service. After installing the E-85A
(including connecting to the network) and before default settings are changed in Run Setup, you can obtain a record of
the defaults by printing the Server Configuration page.
Menu
Access
