EFI E-85A Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 143

background image

Installing System Software

This chapter provides information about how to install system software.

•

The E-85A ships with system software preinstalled on the hard disk drives (HDDs).

•

A re-installation of the system software DVDs will be required if you have replaced the hard disk drive or tried
restoring the system from backup images and the restore did not solve the problem you are troubleshooting.

When you reinstall from the System Software DVDs

The following issues apply to the scenario where you reinstall the system from the System Software DVDs.

•

Jobs:

When you reinstall system software, all jobs in all print queues and all jobs archived locally on the E-85A hard

disk are deleted. To save jobs, ask the site administrator to save them to removable media or a network location, so they
can be re-imported to the E-85A after system software installation. For more information, see Command WorkStation
Help.

•

Job Log:

When you reinstall system software, the list of jobs in the Job Log and any jobs in the queues are deleted. The

site administrator can use Command WorkStation to save a current list of jobs (not the actual jobs) from the Job Log.

•

Fonts:

When you reinstall system software, all fonts on the hard disk drives are deleted. Resident fonts are reinstalled

when you reinstall system software. Any customer-supplied fonts must be reinstalled by the site administrator (see
Command WorkStation Help).

To determine which additional fonts were downloaded to the E-85A, print the Font List before you reinstall the system
software and again after you complete the system software installation. Any fonts

not listed

after installation will need

to be reinstalled. For more information about managing fonts, see Command WorkStation Help.

•

User software:

The E-85A ships with preinstalled user software on the hard disk drives. During system software re

installation, you are prompted to reinstall user software (including Command WorkStation) using the User Software
DVD.

•

Server Configuration page:

Before you reinstall a new version of system software, print the Server Configuration page

). The Server Configuration page provides a record of the customer’s current Setup configurations.

•

Backing up and restoring the configuration:

All Setup configurations, as well as all custom files and templates stored on

the hard disk drives, are deleted when you reinstall system software. Always back up the current E-85A configuration
before you reinstall system software. After the installation is completed, be sure to restore the configuration that you
saved earlier.

•

Monitor profiles:

When you reinstall system software, monitor profiles saved on the hard disk drives are deleted.

Monitor profiles for the E-85A monitor are automatically reinstalled when you reinstall Command WorkStation on the
system.

«
...
97
98
99
100
101
...
»

Содержание E-85A
















































































































































Отзывы:

Нет отзывов

Похожие инструкции для E-85A

Бренд: Panasonic Страницы: 16

vlt soft starter mcd 500

Бренд: Danfoss Страницы: 95

Бренд: Danfoss Страницы: 12

Бренд: Danfoss Страницы: 33

Бренд: Danfoss Страницы: 59

Бренд: Danfoss Страницы: 16

VLT AQUA Drive FC 200

Бренд: Danfoss Страницы: 91

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 100

Бренд: Danfoss Страницы: 82

Бренд: Danfoss Страницы: 18

Бренд: Danfoss Страницы: 12

OPTYMA Plus OP-LPQM

Бренд: Danfoss Страницы: 8

Бренд: UCS Страницы: 4

Бренд: Nedap Страницы: 20

Бренд: Parker Страницы: 12

Бренд: vacuubrand Страницы: 12

Бренд: Vacon Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды