21
Installation and Service Guide: Color Controller E-85A
Installing hardware
(Optional) Connecting the monitor, keyboard, mouse, and power
Before using the E-85A, connect the monitor, keyboard, mouse, and power to the E-85A if applicable.
To connect the monitor, keyboard, mouse, power cable
1
Make sure that the E-85A is installed in the furniture.
For more information, see the assembly instructions that accompany the furniture.
2
Connect the monitor cable to the HDMI port from the graphic board on the connector panel.
3
Connect the monitor power cable to an outlet of the power strip inside the furniture.
Be sure to use the appropriate power cable for your regional outlet type.
4
Place the keyboard and mouse on the furniture table top.
5
Connect the wireless adapter for the keyboard and mouse to one of the USB port that is attached to the furniture stand.
6
Power on the mouse by using the power switch on the bottom side of the mouse.
7
Connect the recessed end of the E-85A power cable to the power connector on the power strip inside the furniture.
Be sure to use the appropriate power cable for your regional outlet type.
Connecting to the printer
Use the following procedure to connect the E-85A to the printer.
To connect to the printer
1
Shut down the E-85A (see
2
Locate the two printer interface cables provided with the E-85A.
3
Power off the printer using the main power switch located behind the front cover.
4
If needed, shut down the E-85A (see
5
Locate the printer interface cable (crossover Ethernet cable) that shipped with the E-85A.
For information on the USB connection used for the power synchronization, see
6
Locate the crossover Ethernet cable that shipped with the E-85A.
