38
Installation and Service Guide: Color Controller E-85A
Using the E-85A
Printable Info menu
This section describes how to print pages such as the Test Page and Configuration page from the Printable Info menu
(described on
). The Printable Info menu is accessed through the Fiery tab (see
Printing the
Configuration page
can be helpful during installation, Setup, and service. After installing the E-85A
(including connecting to the network), and before default settings are changed in Run Setup, you can obtain a record of the
defaults by printing the Configuration page.
Before you perform any service procedure, you should print the E-85A Configuration page, if possible, so you are prepared
to return the settings to their former configuration, if necessary.
Printing the
Test Page
indicates that the E-85A is functional and that the connection between the E-85A and the printer is
working.
To print a page from the Printable Info menu
1
If it is not powered on already, power on the printer and allow it to warm up.
2
If it is not powered on already, power on the E-85A using the power button on the front panel and allow it to start up
completely (approximately three minutes).
Note:
If the power synchronization is enabled, the E-85A will automatically powers on when you power on the printer.
The default setting for power synchronization is OFF. See
on page 26 for more information.
3
Make sure that Idle appears on the Fiery Main menu.
If Busy or Printing appears, the E-85A is processing and you must wait until Idle appears.
4
Touch the Fiery tab.
5
Touch Printable Info and then select the page that you want to print.
The E-85A sends the selected page(s) to the printer.
Clear Server
Clear all jobs in all server queues, as well as all jobs archived on the E-85A hard disk, the
index of archived jobs (in the Archive window), all FreeForm masters, and the index of
FreeForm masters (in the FreeForm window). Consult with your administrator or operator
before choosing Clear Server.
Restart Fiery
Shut down all E-85A activity in the correct manner and then restart. The following options
are available from the submenu that appears:
Restart Fiery Service:
Resets the server software but does not reboot the entire system.
Network access to the E-85A is temporarily interrupted and all currently processing jobs
are aborted and may be lost.
Restart System:
Shuts down and then reboots the E-85A. Network access to the E-85A is
terminated and all currently processing jobs are aborted and may be lost.
Shut Down:
Shuts down all E-85A activity properly.
