93
Installation and Service Guide: Color Controller E-85A
Performing Backup and Restore
You must login to the system as a system administrator to use the Fiery System Restore features.
To access Fiery System Restore on Fiery QuickTouch
1
On Fiery QuickTouch, tap the
Quick launch
icon on the bottom-left corner of the screen.
2
Tap the
Fiery System Restore
icon and log in as a system administrator.
3
Follow the on-screen menus to schedule automatic backups, manually back up the E-85A, or restore the E-85A.
To access the Fiery System Restore from Command WorkStation
1
Start Command WorkStation and login to the E-85A with Administrator privileges.
The default Administrator password is
Fiery.1
(case-sensitive), but the site administrator may have changed the
password.
2
From
Server
menu, select
Device Center
.
3
Click
Tools
on the left side, and then click
Fiery System Restore
.
The Fiery System Restore will be displayed on a default web browser window.
To access the Fiery System Restore from WebTools
1
From a client computer, start a web browser and enter the IP address or the DNS name of the E-85A.
2
In WebTools, select
Fiery System Restore
icon on the left side.
The available features are listed under
Fiery System Restore
section.
You must log in to the system as a system administrator before performing any of the backup/restore process.
Note:
The following tasks describe using Fiery System Restore on WebTools. Fiery QuickTouch uses the same menu
selections and features for backing up and restoring the E-85A. Refer to the following tasks if you are using Fiery System
Restore on Fiery QuickTouch.
To setup automatic scheduled backup
Note:
When you set up the scheduled backup, only the latest backup will be stored. Previous backups will be deleted.
1
In
Fiery System Restore
window, click
Schedule Backup
.
If you have not logged in as an Administrator user, you are required to do so. Enter the administrator’s password
(default password is Fiery.1), and click
Log In
.
2
Select
Enable automatic backup
, and select when you want to start the backup process on the E-85A.
Note:
The backup process takes more than an hour to complete and it requires the E-85A to be Idle status. If the E-85A
is not in Idle status, the backup process does not start.
3
Click
Save
.
