103
Installation and Service Guide: Color Controller E-85A
Installing System Software
4
(Optional) Set up the proxy configuration file if you have a proxy server.
In Configure (see
), click
Server
>
System Updates
>
Proxy Settings
, and enter the proxy server information.
Save your changes and reboot the E-85A.
For more information on setting up proxy configuration, see
Configuration and Setup
, which is part of the user
documentation.
Verify the E-85A operation
1
Print the Test Page and the Server Configuration page (
).
If the Test Page does not print, verify that the printer interface cables are securely connected and on the correct ports;
verify that the printer interface board is securely connected to the motherboard; look up printing problems in
“Table 6: E-85A error messages and conditions”
If image quality is poor, test the printer (see the service documentation that accompanies the printer).
2
Verify that the E-85A is connected to the network (see
).
3
Ask the site administrator to download a test job over the network.
If the job does not print or has poor image quality, look up print problems in
“Table 6: E-85A error messages and
on page 113 and the user documentation Troubleshooting topics.
Before you leave the customer site
1
Remind the site administrator to do the following:
•
Import archived jobs.
Please note that some archived jobs may not print.
•
Register Adobe Acrobat the first time you use it.
2
Reinstall the following:
•
Fonts
•
Custom simulations
Note:
This upgrade may not be compatible with old user software.
3
Back up the E-85A hard disk drives.
System software installation error messages
If an error message displays when you install or upgrade system software, do the following:
•
If prompted, save the log.
•
If you are not prompted to save the log, record the error message.
